Certified Woman-Owned Small Business (WOSB)
Certified Bay Area Green Business
Small Business Locally Owned & Operated (SF Bay Area)


Certified Woman-Owned Small Business (WOSB)
Certified Bay Area Green Business
Small Business Locally Owned & Operated

Nixxit Logo

How To Disassemble Office Cubicles

How To Disassemble Office Cubicles 1

If your office space is being renovated, moved to a new location, or closed, you’ll need to manage the furniture. Looking at the cubicles in your office space may make this seem like a daunting task– but it doesn’t have to be.

The good news: cubicles are relatively easy to take apart yourself, or you can hire a professional company like Nixxit to break them down for you. Either way, you should be aware of the general process. Keep reading to learn about the steps you need to take to begin disassembling your office cubicles.

Communicate to Staff

Before any office cubicles can be disassembled, you will need to communicate with your employees. They will need to clean out their office spaces, so you should give them plenty of notice. This also provides time for your staff to manage any disruptions to their workflow.

Besides personal belongings, another consideration is wiring. Power cables for computers, printers, or other electronic devices can obstruct the moving process, causing a potential tripping hazard. Further, you’ll need to decide how to handle removing unwanted equipment like furniture or electronics. Some options are liquidating, donating, or selling the equipment.

Gather the Tools

Take a look around your office cubicles, noting the types of screws, bolts, or nuts. You’ll want to gather a flathead or screwdriver, an adjustable wrench, a rubber hammer, and a ladder.

Removing cubicle walls can be intimidating if you’ve never done it before. You can find the manufacturer’s website for a how-to guide, or you could ask an experienced friend for assistance. With another person involved, the process will be safer and more efficient. Take the time to review safe practices for lifting heavy materials to avoid injuries.

Remove Built-in Features

Some office cubicles come with built-in desks, cabinets, shelves, or electrical components. Typically, these parts are screwed into the panels. You will need to first remove the cubicle desk. Crawl under or around the desk to find the screws, then remove them. Set the desk aside.

Then, you can remove the shelves or cabinets through the same practice. It’s good practice to keep track of the screws, knowing which screws go to which parts. While removing these pieces, have the other person ensure the desks, cabinets, and shelves do not fall over once unscrewed. This will prevent you and them from getting injured. If your cubicles have electrical features hard-wired in, you may need to hire an electrician first to disconnect these features.

Need Help with Office Junk Removal in the Bay Area, CA?

Nixxit Junk Removal can help with your office cleanout needs in the Bay Area.

  • 10+ Years of Commercial Junk Removal Experience
  • Locally Owned and Operated
  • We Do All The Work!
  • Donation and Recycling
  • Same Day Appointments Available!
Get Started

Remove the Panels

Now that the built-in features are out of the way, you should be able to see how the outer panels are connected to the inner panels. It will be easier to start from the outside and work your way in.

After finding your starting place, remove the screws, springs, latches, or levers from the outer panels. The other person can help hold the panel up so it doesn’t fall over as you work. Then, you can move into the center panels. A ladder can be used to help you reach the top pieces. Safety first!

Remove From Connector Rail

Keep in mind the inner panels might be bolted into a connector rail. Use the adjustable wrench to remove the bolts. The other person should support the panel to avoid it falling.

But if there are no bolts holding the panel in, get a screwdriver to pry it out. The other person can help pull it out. If the panel still doesn’t budge, use the rubber hammer to tap it free. Wiggling the panel can be helpful to get it out of the connector rail.

Utilize A Professional Company

Now that you have your office cubicles disassembled, a professional moving company can help facilitate removing the pieces. A good moving team can alleviate the stress and strain of getting rid of those cubicle pieces. Junk Removal companies like Nixxit offer disassembly and removal services for office cubicles.

Frequently Asked Questions

How Do You Move a Heavy Cubicle?

Office cubicles may look lightweight, but larger ones can be quite heavy. Practice safe lifting techniques when handling these larger pieces. If you are in doubt, ask a friend for help or contact a professional company.

Need Cubicle Removal in the Bay Area, CA? We Can Help.

Disassembling your office cubicles can be done in a few steps. Once you’ve informed your staff and office equipment is moved out of the way, you can start disassembling the panels. With the right tools, this process can be made easy by working from the outside in. You can choose to do it yourself, or you can use a professional clean-out company.

Hire Nixxit Junk Removal to disassemble and remove your office cubicles in the Bay Area. Nixxit offers full-service, sustainable office furniture removal. Get in touch by selecting your location below and giving us a call!

Location Dropdown
Nixxit Logo

nixxitjunk · Jul 15